Shopping Cart
There are no more items in your cart
IMP's let you take advantage of the smallest and most marginal placements. Nut heads are made of brass, allowing them to bite into small placements but making them strong enough to resist pulling through. These are soldered directly on to wires, allowing a thicker wire to be used and increasing the strength of the IMP. The swage on the wire is colour coded for quick size selection, and allows one side of the wire to slide, letting the IMP self equalize when loaded and increasing placement security.IMP's are invaluable for those pushing into harder grades and need to take advantage of all protection options.
| Product Name | Product Code | Colour | Strength | Weight | Range | Certification |
|---|---|---|---|---|---|---|
|
IMP Brass Nut 1
|
A1721 | Blue | 4kN | 4g | 4.0 / 5.6mm | EN 12270:2013 |
|
IMP Brass Nut 2
|
A1722 | Red | 5kN | 8g | 4.8 / 6.4mm | EN 12270:2013 |
|
IMP Brass Nut 3
|
A1723 | Silver | 5kN | 10g | 6.4 / 7.9mm | EN 12270:2013 |
|
IMP Brass Nut 4
|
A1724 | Purple | 7kN | 13g | 7.9 / 9.5mm | EN 12270:2013 |
|
IMP Brass Nut 5
|
A1725 | Green | 7kN | 16g | 9.5 / 11.7mm | EN 12270:2013 |
|
IMP Brass Nut Set 1-5
|
A1721/25 | Assorted | 4 - 7kN | 51g | 4.0 - 11.7mm | EN 12270:2013 |
A1721/25A
5031290230377
No reviews
16 other products in the same category:
Cams and Nuts
Peenut set 1-5 Nut set
Cams and Nuts
Offset Stopper Nuts
You might also like:
You need to login or create account
Save products on your wishlist to buy them later or share with your friends.
Product added to wishlist
ALL TARIFFS AND DUTIES CALCULATED AT CHECKOUT